(Advanced)

Timing Belt Pulleys 2mm Pitch GT Ser.(9mm wide)Double Flange

  • G=No. of Grooves
  • B =Bore +.001
  • OD =Outside Diameter
  • FD =Flange Diameter +/-1/64
  • F =Face Width
  • HD =Hub Diameter +/-1/64
  • OAL =Overall Length +/-1/64
  • SS=Screw Size
  • PD =Pitch Dia.
Material: Aluminum Alloy. Two set screws 90 degrees apart.
Part No. of Grooves Bore +.001 Outside Diameter Flange Diameter +/-1/64 Face Width Hub Diameter +/-1/64 Overall Length +/-1/64 Screw Size Pitch Dia.
Buy View
FMA-F5-17 17 0.188 0.406 0.635 0.505 0.312 0.741 #4-40 0.426
FMA-F5-18 18 0.188 0.431 0.635 0.505 0.312 0.741 #4-40 0.451
FMA-F5-19 19 0.188 0.456 0.635 0.505 0.338 0.741 #4-40 0.476
FMA-F5-20 20 0.188 0.481 0.685 0.505 0.364 0.741 #4-40 0.501
FMA-F5-21 21 0.188 0.506 0.710 0.505 0.390 0.741 #4-40 0.526
FMA-F5-22 22 0.188 0.531 0.740 0.505 0.390 0.741 #4-40 0.551
FMA-F5-24 24 0.250 0.582 0.815 0.505 0.442 0.803 # 6-40 0.602
FMA-F5-26 26 0.250 0.632 0.840 0.505 0.490 0.803 # 6-40 0.652
FMA-F5-28 28 0.250 0.682 0.895 0.505 0.494 0.803 # 6-40 0.702
FMA-F5-30 30 0.250 0.732 0.945 0.505 0.546 0.803 #8-32 0.752
FMA-F5-32 32 0.250 0.782 1.000 0.505 0.598 0.803 #8-32 0.802
FMA-F5-36 36 0.250 0.882 1.105 0.505 0.676 0.803 #8-32 0.902
FMA-F5-40 40 0.250 0.983 1.210 0.521 0.754 0.834 #8-32 1.003
FMA-F5-45 45 0.250 1.108 1.340 0.521 0.900 0.834 #8-32 1.128
FMA-F5-50 50 0.250 1.233 1.470 0.521 0.940 0.834 #8-32 1.253
FMA-F5-56 56 0.250 1.384 1.575 0.521 1.030 0.834 #8-32 1.404